Shaft Lighting Projects
LED STRIP LIGHT
The new advanced energy saving solution to comply with EN81-20, Easier Installation, Energy Efficient, and Lower Cost replancement for the traditional T6/T8 lightings or lamps.
Suitable for the homogeneous illumination of the lift shaft to avoid horizontal shadows which could be caused by the distance between two traditional lamps.
The LED Strip shaft light fixed on the ceiling and drop down to the pit.
The LED lighting board coated with flame-retardant PVC material, give the IP65 protection.
The standard package contains 10m power supply cable and ample installation kits.
Commonly the lumens in 1m could supply enough lux in 6m² cross-section.
- Length: 1m ~ 100m (Pre-cut or cut by yourself)
- Power Supply Cable: 1m/8m/10m, EU or AU plug
- Power: 7w/m
- SMD Model: 5050
- Input Voltage: 12VDC / 24VDC / 240VAC
- Lumens: 540lm/m
- CRI: >90
- Color: Cold White / White / Warm White
- Protective Level: IP67
Installation Kits: Plastic self-locking band and plastic expansion screws.
LED Strip Light Fixtures
It can be firmly mounted on the wall with the provided fixtures, first step to drilling a hole on the wall to knock into the expansion screws and then tied the band. The distance between two fixed points could be 2~3m.
T6/T8 LED SHAFT LIGHT
LED Tube shaft light, different dimensions for options, T6 / T8. Double control switch method could be selected.
- Series: T6 / T8
- Connection Cable: 1.2m
- Power Supply Cable: 10m
- Power: 12w / 16W
- Input Voltage: 150 ~ 250VAC
- Protective Level: IP20 / IP65
Including Installation fixtures: Plastic self-locking band and plastic expansion screws.
New standard for Elevator
Xiongchu Avenue #28
Wuhan, Hubei, China 430070